dmesg - NVIDIA GeForce GTX 650 Ti
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-19-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:35:23 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dcfd1fff] usable
BIOS-e820: [mem 0x00000000dcfd2000-0x00000000dd461fff] reserved
BIOS-e820: [mem 0x00000000dd462000-0x00000000dd475fff] ACPI data
BIOS-e820: [mem 0x00000000dd476000-0x00000000dd597fff] ACPI NVS
BIOS-e820: [mem 0x00000000dd598000-0x00000000de3f1fff] reserved
BIOS-e820: [mem 0x00000000de3f2000-0x00000000de3f2fff] usable
BIOS-e820: [mem 0x00000000de3f3000-0x00000000de435fff] ACPI NVS
BIOS-e820: [mem 0x00000000de436000-0x00000000de58cfff] usable
BIOS-e820: [mem 0x00000000de58d000-0x00000000dec0dfff] reserved
BIOS-e820: [mem 0x00000000dec0e000-0x00000000dec3ffff] usable
BIOS-e820: [mem 0x00000000dec40000-0x00000000deff0fff] reserved
BIOS-e820: [mem 0x00000000deff1000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000031effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard h8-1513c/2AD5, BIOS 8.17 02/06/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x31f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask F00000000 write-back
2 base 300000000 mask FF0000000 write-back
3 base 310000000 mask FF8000000 write-back
4 base 318000000 mask FFC000000 write-back
5 base 31C000000 mask FFE000000 write-back
6 base 31E000000 mask FFF000000 write-back
7 base 0E0000000 mask FE0000000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 4GB, type WB
reg 2, base: 12GB, range: 256MB, type WB
reg 3, base: 12544MB, range: 128MB, type WB
reg 4, base: 12672MB, range: 64MB, type WB
reg 5, base: 12736MB, range: 32MB, type WB
reg 6, base: 12768MB, range: 16MB, type WB
reg 7, base: 3584MB, range: 512MB, type UC
total RAM covered: 12272M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 4GB, type WB
reg 5, base: 12GB, range: 512MB, type WB
reg 6, base: 12784MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7a0-0x000fd7af] mapped at [ffff8800000fd7a0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0xdeffffff]
[mem 0x00000000-0xdeffffff] page 2M
kernel direct mapping tables up to 0xdeffffff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x31effffff]
[mem 0x100000000-0x31effffff] page 2M
kernel direct mapping tables up to 0x31effffff @ [mem 0xdeff6000-0xdeffffff]
RAMDISK: [mem 0x36120000-0x37087fff]
ACPI: RSDP 00000000000f0490 00024 (v02 HPQOEM)
ACPI: XSDT 00000000dd46a080 0007C (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013)
ACPI: FACP 00000000dd473948 0010C (v05 HPQOEM SLIC-CPC 01072009 AMI 00010013)
ACPI: DSDT 00000000dd46a188 097B9 (v02 HPQOEM SLIC-CPC 00000000 INTL 20051117)
ACPI: FACS 00000000dd596080 00040
ACPI: APIC 00000000dd473a58 00092 (v03 HPQOEM SLIC-CPC 01072009 AMI 00010013)
ACPI: FPDT 00000000dd473af0 00044 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013)
ACPI: MCFG 00000000dd473b38 0003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00000097)
ACPI: MSDM 00000000dd473b78 00055 (v03 HPQOEM SLIC-CPC 01072009 AMI 00010013)
ACPI: HPET 00000000dd473bd0 00038 (v01 HPQOEM SLIC-CPC 01072009 AMI. 00000005)
ACPI: SSDT 00000000dd473c08 0036D (v01 HPQOEM SLIC-CPC 00001000 INTL 20091112)
ACPI: SSDT 00000000dd473f78 009AA (v01 HPQOEM SLIC-CPC 00003000 INTL 20051117)
ACPI: SSDT 00000000dd474928 00A92 (v01 HPQOEM SLIC-CPC 00003000 INTL 20051117)
ACPI: DMAR 00000000dd4753c0 00080 (v01 HPQOEM SLIC-CPC 00000001 INTL 00000001)
ACPI: DBGP 00000000dd475440 00034 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000031effffff]
Initmem setup node 0 [mem 0x00000000-0x31effffff]
NODE_DATA [mem 0x31effb000-0x31effffff]
[ffffea0000000000-ffffea000c7fffff] PMD -> [ffff880312600000-ffff88031e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x31effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xdcfd1fff]
node 0: [mem 0xde3f2000-0xde3f2fff]
node 0: [mem 0xde436000-0xde58cfff]
node 0: [mem 0xdec0e000-0xdec3ffff]
node 0: [mem 0xdeff1000-0xdeffffff]
node 0: [mem 0x100000000-0x31effffff]
On node 0 totalpages: 3129592
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 14086 pages used for memmap
DMA32 zone: 887397 pages, LIFO batch:31
Normal zone: 34752 pages used for memmap
Normal zone: 2189376 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000dcfd2000 - 00000000dd462000
PM: Registered nosave memory: 00000000dd462000 - 00000000dd476000
PM: Registered nosave memory: 00000000dd476000 - 00000000dd598000
PM: Registered nosave memory: 00000000dd598000 - 00000000de3f2000
PM: Registered nosave memory: 00000000de3f3000 - 00000000de436000
PM: Registered nosave memory: 00000000de58d000 - 00000000dec0e000
PM: Registered nosave memory: 00000000dec40000 - 00000000deff1000
PM: Registered nosave memory: 00000000df000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88031ec00000 s85056 r8192 d21440 u262144
pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3080684
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12223168k/13090816k available (7006k kernel code, 572448k absent, 295200k reserved, 6238k data, 992k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 50331648 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3392.291 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.58 BogoMIPS (lpj=13569164)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26690 entries in 105 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000dd3d9000 end: 0x000000dd3f5fff
IOAPIC id 0 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (54276.65 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdd476000-0xdd597fff] (1187840 bytes)
PM: Registering ACPI NVS region [mem 0xde3f3000-0xde435fff] (274432 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000dd40f018 0083B (v01 HPQOEM SLIC-CPC 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 HPQOEM SLIC-CPC 00003001 INTL 20051117)
ACPI: SSDT 00000000dd410a98 00303 (v01 HPQOEM SLIC-CPC 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 HPQOEM SLIC-CPC 00003000 INTL 20051117)
ACPI: SSDT 00000000dd411a98 00119 (v01 HPQOEM SLIC-CPC 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 HPQOEM SLIC-CPC 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 10: [mem 0xf7300000-0xf730ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf731a000-0xf731a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7318000-0xf73183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7310000-0xf7313fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7317000-0xf73173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e46] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf7316000-0xf73167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7315000-0xf73150ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:11c6] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [14e4:4359] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf7200000-0xf7203fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:04:00.0: [1969:1091] type 00 class 0x020000
pci 0000:04:00.0: reg 10: [mem 0xf7100000-0xf713ffff 64bit]
pci 0000:04:00.0: reg 18: [io 0xd000-0xd07f]
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdcfd2000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde3f3000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde58d000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdec40000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x31f000000-0x31fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] has been reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf2000000-0xf2000fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15776k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd8fd2000-0xdcfd2000] (64MB) mapped at [ffff8800d8fd2000-ffff8800dcfd1fff]
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1368807256.420:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 23904
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7318000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7317000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4fb521df0b0fa81f775431361b8076d5d0f1869a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:05: setting system clock to 2013-05-17 16:14:17 UTC (1368807257)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 1080k freed
udevd[128]: starting version 175
Disabling lock debugging due to kernel taint
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316180 irq 43
ata3: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316200 irq 43
ata4: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316280 irq 43
ata5: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316300 irq 43
ata6: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316380 irq 43
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88030d478758), AE_NOT_FOUND (20121018/psparse-537)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88030d4786e0), AE_NOT_FOUND (20121018/psparse-537)
ata1.00: ATA-8: ST2000DL003-9VT166, HP16, max UDMA/100
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: HPA detected: current 488395055, native 488397168
ata2.00: ATA-7: WDC WD2500JS-08NCB1, 10.02E01, max UDMA/133
ata2.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88030d478758), AE_NOT_FOUND (20121018/psparse-537)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88030d4786e0), AE_NOT_FOUND (20121018/psparse-537)
ata1.00: configured for UDMA/100
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST2000DL003-9VT1 HP16 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA WDC WD2500JS-08N 10.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 488395055 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88030d4788c0), AE_NOT_FOUND (20121018/psparse-537)
ata5.00: ATAPI: hp CDDVDW SH-216BB, HE40, max UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88030d4788c0), AE_NOT_FOUND (20121018/psparse-537)
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM hp CDDVDW SH-216BB HE40 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 3-2: new high-speed USB device number 2 using xhci_hcd
usb 3-2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-2: Product: SAMSUNG_Android_SGH-I747M
usb 3-2: Manufacturer: SAMSUNG
usb 3-2: SerialNumber: 74147418
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 3392.294 MHz
Switching to clocksource tsc
usb 1-1.3: New USB device found, idVendor=058f, idProduct=6362
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: Mass Storage Device
usb 1-1.3: Manufacturer: Generic
usb 1-1.3: SerialNumber: 058F63626476
Initializing USB Mass Storage driver...
scsi6 : usb-storage 1-1.3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1.5: new full-speed USB device number 4 using ehci-pci
usb 1-1.5: New USB device found, idVendor=0a5c, idProduct=21f1
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.5: Product: BCM20702A0
usb 1-1.5: Manufacturer: Broadcom Corp
usb 1-1.5: SerialNumber: 74E54398CF00
usb 2-1.5: new low-speed USB device number 3 using ehci-pci
usb 2-1.5: New USB device found, idVendor=04f2, idProduct=1060
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: USB Keyboard
usb 2-1.5: Manufacturer: CHICONY
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input2
hid-generic 0003:04F2:1060.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.5/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input3
hid-generic 0003:04F2:1060.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.5/input1
usb 2-1.6: new low-speed USB device number 4 using ehci-pci
usb 2-1.6: New USB device found, idVendor=046d, idProduct=c50e
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: USB RECEIVER
usb 2-1.6: Manufacturer: Logitech
input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input4
hid-generic 0003:046D:C50E.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-1.6/input0
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:1: Attached scsi generic sg4 type 0
sd 6:0:0:2: Attached scsi generic sg5 type 0
sd 6:0:0:3: Attached scsi generic sg6 type 0
sd 6:0:0:1: [sdd] Attached SCSI removable disk
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:2: [sde] Attached SCSI removable disk
sd 6:0:0:3: [sdf] Attached SCSI removable disk
Adding 12517372k swap on /dev/sda5. Priority:-1 extents:1 across:12517372k
udevd[419]: starting version 175
type=1400 audit(1368832467.200:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=610 comm="apparmor_parser"
type=1400 audit(1368832467.200:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=610 comm="apparmor_parser"
type=1400 audit(1368832467.200:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=610 comm="apparmor_parser"
type=1400 audit(1368832467.204:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=611 comm="apparmor_parser"
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x16
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Compat-drivers backport release: compat-drivers-v3.9-rc4-2-su
Backport based on linux-stable.git v3.9-rc4
compat.git: linux-stable.git
lp: driver loaded but no devices found
Qualcomm Atheros(R) AR816x/AR817x PCI-E Ethernet Network Driver
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 44 for MSI/MSI-X
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
nvidia: module license 'NVIDIA' taints kernel.
cfg80211: Calling CRDA to update world regulatory domain
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
alx 0000:04:00.0: alx(70:54:d2:3d:7e:e2): Qualcomm Atheros Ethernet Network Connection
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.30 Wed Mar 27 16:56:45 PDT 2013
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x16
microcode: Microcode Update Driver: v2.00 , Peter Oruba
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
INFO @wl_cfg80211_attach : Registered CFG80211 phy
lib80211_crypt: registered algorithm 'TKIP'
kvm: disabled by bios
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Speaker Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Speaker CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Speaker Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Speaker Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
eth1: Broadcom BCM4359 802.11 Hybrid Wireless Controller 6.20.155.1 (r326264)
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
FS-Cache: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: failsafe main process (1127) killed by TERM signal
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
init: udev-fallback-graphics main process (1191) terminated with status 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1368832469.296:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1280 comm="apparmor_parser"
type=1400 audit(1368832469.296:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1282 comm="apparmor_parser"
type=1400 audit(1368832469.296:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1280 comm="apparmor_parser"
type=1400 audit(1368832469.296:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1282 comm="apparmor_parser"
type=1400 audit(1368832469.296:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1288 comm="apparmor_parser"
type=1400 audit(1368832469.296:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1286 comm="apparmor_parser"
init: avahi-cups-reload main process (1383) terminated with status 1
ppdev: user-space parallel port driver
/dev/vmmon[1512]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1512]: Module vmmon: initialized
[1521]: VMCI: shared components initialized.
[1521]: VMCI: host components initialized.
[1521]: VMCI: Module registered (name=vmci,major=10,minor=53).
[1521]: VMCI: Using host personality
[1521]: VMCI: Module (name=vmci) is initialized
init: ureadahead-other main process (1514) terminated with status 2
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
alx 0000:04:00.0: irq 46 for MSI/MSI-X
alx 0000:04:00.0: irq 47 for MSI/MSI-X
alx 0000:04:00.0: irq 48 for MSI/MSI-X
alx 0000:04:00.0: irq 49 for MSI/MSI-X
alx 0000:04:00.0: irq 50 for MSI/MSI-X
alx 0000:04:00.0: irq 51 for MSI/MSI-X
alx 0000:04:00.0: irq 52 for MSI/MSI-X
alx 0000:04:00.0: irq 53 for MSI/MSI-X
alx 0000:04:00.0: irq 54 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
alx 0000:04:00.0 eth0: NIC Link Up: 1 Gbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
/dev/vmnet: open called by PID 1699 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 1888 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1890 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1902 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
userif-3: sent link down event.
userif-3: sent link up event.[ 16.311679] /dev/vmnet: open called by PID 1903 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1905 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x19d offMax=0x1294
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (2582) terminated with status 1
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
usb 3-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880309366dc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880309366d80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880309366e00
systemd-hostnamed[6840]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
hda-intel 0000:00:1b.0: Unstable LPIB (14064 >= 1764); disabling LPIB delay counting
audit_printk_skb: 63 callbacks suppressed
type=1400 audit(1368836792.325:33): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" name="/proc/9185/cmdline" pid=9127 comm="dbus-daemon" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1368836792.329:34): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" name="/proc/9189/cmdline" pid=9127 comm="dbus-daemon" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1368836792.329:35): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" name="/proc/9187/cmdline" pid=9127 comm="dbus-daemon" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1368836792.329:36): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" name="/proc/9193/cmdline" pid=9127 comm="dbus-daemon" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1368836792.333:37): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" name="/proc/9191/cmdline" pid=9127 comm="dbus-daemon" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1368836792.917:38): apparmor="DENIED" operation="mount" parent=1 profile="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" name="/run/user/guest-DpyLfZ/gvfs/" pid=9209 comm="gvfsd-fuse" fstype="fuse.gvfsd-fuse" srcname="gvfsd-fuse" flags="rw, nosuid, nodev"
type=1400 audit(1368836793.957:39): apparmor="DENIED" operation="open" parent=9075 profile="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" name="/etc/compizconfig/unity.ini" pid=9236 comm="compiz" requested_mask="c" denied_mask="c" fsuid=120 ouid=0
type=1400 audit(1368836798.945:40): apparmor="DENIED" operation="open" parent=9075 profile="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" name="/proc/sys/vm/overcommit_memory" pid=9325 comm="pool" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
type=1400 audit(1368836839.421:41): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" name="/proc/sys/vm/overcommit_memory" pid=9727 comm="pool" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1368836852.725:42): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" name="/proc/sys/vm/overcommit_memory" pid=9695 comm="pool" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
usb 3-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880309366dc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880309366d80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880309366e00
usb 3-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880309366dc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880309366d80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880309366e00
usb 3-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880309366dc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880309366d80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880309366e00
usb 3-2: USB disconnect, device number 2
usb 3-2: new high-speed USB device number 3 using xhci_hcd
usb 3-2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-2: Product: SAMSUNG_Android_SGH-I747M
usb 3-2: Manufacturer: SAMSUNG
usb 3-2: SerialNumber: 74147418
usb 3-2: USB disconnect, device number 3
usb 3-2: new high-speed USB device number 4 using xhci_hcd
usb 3-2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-2: Product: SAMSUNG_Android_SGH-I747M
usb 3-2: Manufacturer: SAMSUNG
usb 3-2: SerialNumber: 74147418
systemd-hostnamed[21239]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 3-2: USB disconnect, device number 4
usb 3-2: new high-speed USB device number 5 using xhci_hcd
usb 3-2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-2: Product: SAMSUNG_Android_SGH-I747M
usb 3-2: Manufacturer: SAMSUNG
usb 3-2: SerialNumber: 74147418
usb 3-2: USB disconnect, device number 5
usb 3-2: new high-speed USB device number 6 using xhci_hcd
usb 3-2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-2: Product: SAMSUNG_Android_SGH-I747M
usb 3-2: Manufacturer: SAMSUNG
usb 3-2: SerialNumber: 74147418
systemd-hostnamed[30481]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
compiz[3126]: segfault at 0 ip 00000000416c0f71 sp 00007fffc2e456d8 error 4 in glDNzGJF (deleted)[416bf000+2000]
usb 3-2: USB disconnect, device number 6
usb 3-2: new high-speed USB device number 7 using xhci_hcd
usb 3-2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-2: Product: SAMSUNG_Android_SGH-I747M
usb 3-2: Manufacturer: SAMSUNG
usb 3-2: SerialNumber: 74147418
systemd-hostnamed[5325]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode
usb 3-2: USB disconnect, device number 7
usb 3-2: new high-speed USB device number 8 using xhci_hcd
usb 3-2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-2: Product: SAMSUNG_Android_SGH-I747M
usb 3-2: Manufacturer: SAMSUNG
usb 3-2: SerialNumber: 74147418
usb 3-2: USB disconnect, device number 8
usb 3-2: new high-speed USB device number 9 using xhci_hcd
usb 3-2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-2: Product: SAMSUNG_Android_SGH-I747M
usb 3-2: Manufacturer: SAMSUNG
usb 3-2: SerialNumber: 74147418
systemd-hostnamed[12934]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!